Evaluation of the genotoxicity, cytotoxicity, and bioactivity of calcium silicate-based cements.

BACKGROUND: As calcium silicate-based cements (CSCs) have found success in various vital pulp therapy applications, several new CSC products have emerged. This study aimed to assess the genotoxicity, cytotoxicity, and bioactivity of four CSCs by comparing the newly introduced materials Bio MTA+ and MTA Cem with previously studied materials, Biodentine and NeoMTA. METHODS: Genotoxicity was evaluated using the micronucleus (MN) assay in human peripheral blood lymphocyte cells, measuring MN frequency and nuclear division index (NDI). Cytotoxicity was assessed in human dental pulp stem cells through the Water-Soluble Tetrazolium Salt-1 (WST-1) colorimetric assay. Bioactivity was determined by ELISA, measuring the levels of angiogenic and odontogenic markers (BMP-2, FGF-2, VEGF, and ALP). Statistical analyses included ANOVA, Dunnet and Sidak tests, and Wald chi-square test. (p < .05). RESULTS: The MN frequency in the groups was significantly lower than that in the positive control group (tetraconazole) (p < .05). NDI values decreased with increasing concentration (p < .05). Bio MTA+ and NeoMTA showed decreased cell viability at all concentrations in 7-day cultures (p < .01). All materials increased BMP-2, FGF-2, and VEGF levels, with Biodentine and NeoMTA showing the highest levels of BMP-2 and FGF-2 on day 7. Biodentine displayed the highest VEGF levels on day 7. Biodentine and NeoMTA groups exhibited significantly higher ALP activity than the Bio MTA+ and MTA Cem groups by day 7. CONCLUSION: Bio MTA+ and MTA Cem demonstrated no genotoxic or cytotoxic effects. Moreover, this study revealed bioactive potentials of Bio MTA+ and MTA Cem by enhancing the expression of angiogenic and osteogenic growth factors.

Histopathological, biochemical and molecular studies on a model of systemic autoimmune disease induced by sodium silicate in non-genetically prone rats.

Sodium silicate (Na2SiO3) is an inorganic silica salt used in many products. Few studies reported autoimmune diseases (AIDs) due to Na2SiO3 exposure. This study investigates the role of Na2SiO3 exposure by different routes and doses in AID development in rats. We assigned 40 female rats to four groups: G1 control group, G2 rats were subcutaneously injected with 5 mg Na2SiO3 suspension, and G3 and G4 rats were orally administered 5 mg and 7 mg Na2SiO3 suspension, respectively. Na2SiO3 was administered weekly for 20 weeks. Serum anti-nuclear antibodies (ANA) detection, histopathology of kidney, brain, lung, liver, and heart, oxidative stress biomarkers (MDA and GSH) in tissues, Matrix metalloproteinase activity in serum, TNF-α, and Bcl-2 expression in tissues were performed. ANA was significantly increased in silicate groups, especially G2. Creatinine was significantly increased in silicate groups. Histopathology revealed vasculitis and fibrinoid degeneration of blood vessels, a picture of immune-mediated glomerulonephritis in the kidneys, and chronic interstitial pneumonia with medial hypertrophy of pulmonary blood vessels. The activity of gelatinases (MMP-2 and MMP-9) and collagenase (MMP-13), which play role in inflammation, remodeling, and immune complex degradation, were significantly increased in the silicate-exposed groups. Bcl-2 was significantly decreased, indicating apoptosis. Therefore, oral administration and subcutaneous injection of Na2SiO3 induced immune-mediated glomerulonephritis with elevated ANA levels and overexpression of TNF-α in rats.

An in vitro assessment of the toxicity of two-dimensional synthetic and natural layered silicates.

Natural Layered Silicates (NLS) and Synthetic Layered Silicates (SLS) are a diverse group of clay minerals that have attracted great interest in various branches of industry. However, despite growing demand for this class of material, their impact on human health has not been fully investigated. Therefore, the aim of this study was to evaluate and compare the potential toxic effects of a wide range of commercially available SLS and NLS of varying physicochemical properties (lithium (Li) or fluoride (F) content and size). Mouse BALB/c monocyte macrophage (J774A.1) and human monocyte-derived macrophages (MDMs) were chosen as in vitro models of alveolar macrophages. Montmorillonite, hectorite, Medium (med) F/High Li and Low F/Med Li particles, were cytotoxic to cells and induced potent pro-inflammatory responses. The remaining particles (No F/Very (V)Low Li, No F/Med Li, No F/Low Li, High F/Med Li and High F/Med Li washed) were non- to relatively low- cytotoxic and inflammogenic, in both type of cells. In an acellular condition none of the tested samples increased reactive oxygen species (ROS), while ROS generation was observed following exposure to sublethal concentrations of Med F/High Li, Low F/Med Li, montmorillonite and hectorite samples, in J774A.1 cells. Based on the results obtained in this study the toxic potency of tested samples was not associated with lithium or fluoride content, but appeared to be dependent on particle size, with the platelets of larger dimension and lower surface area being more potent than the smaller platelet particles with higher surface area. In addition, the increased bioactivity of Med F/High Li and Low F/Med Li was associated with endotoxin contamination. Obtained results demonstrated that layered silicate materials have different toxicological profiles and suggest that toxicological properties of a specific layered silicate should be investigated on an individual basis.

NIR-Triggered Blasting Nanovesicles for Targeted Multimodal Image-Guided Synergistic Cancer Photothermal and Chemotherapy.

Escorting therapeutics for malignancies by nano-encapsulation to ameliorate treatment effects and mitigate side effects has been pursued in precision medicine. However, the majority of drug delivery systems suffer from uncontrollable drug release kinetics and thus lead to unsatisfactory triggered-release efficiency along with severe side effects. Herein, we developed a unique nanovesicle delivery system that shows near-infrared (NIR) light-triggered drug release behavior and minimal premature drug release. By co-encapsulation of superparamagnetic iron oxide (SPIO) nanoparticles, the ultrasound contrast agent perfluorohexane (PFH), and cisplatin in a silicate-polyaniline vesicle, we achieved the controllable release of cisplatin in a thermal-responsive manner. Specifically, vaporization of PFH triggered by the heat generated from NIR irradiation imparts high inner vesicle pressure on the nanovesicles, leading to pressure-induced nanovesicle collapse and subsequent cisplatin release. Moreover, the multimodal imaging capability can track tumor engagement of the nanovesicles and assess their therapeutic effects. Due to its precise inherent NIR-triggered drug release, our system shows excellent tumor eradication efficacy and biocompatibility in vivo, empowering it with great prospects for future clinical translation.

Alterations of mitochondrial dynamics, inflammation and mineralization potential of lipopolysaccharide-induced human dental pulp cells after exposure to N-acetyl cysteine, Biodentine or ProRoot MTA.

AIM: To investigate the effects of N-acetyl cysteine (NAC), Biodentine, ProRoot MTA and their combinations, on cell viability, mitochondrial reactive oxygen species (mtROS) production, mineralization and on the expression of genes related to inflammatory cytokine production, mitochondrial dynamics and cell apoptosis of lipopolysaccharide (LPS)-induced human dental pulp cells (hDPCs). METHODOLOGY: Isolated hDPCs were exposed to 20 µg mL-1 of Escherichia coli (E. coli) LPS for 24 h, before the experiment, except for the control group. Eight experimental groups were assigned: (i) control (hDPCs cultured in regular medium), (ii) +LPS (hDPCs cultured in LPS medium throughout the experiment), (iii) -LPS/Media, (iv) -LPS/BD, (v) -LPS/MTA, (vi) -LPS/NAC, (vii) -LPS/BD + NAC and (viii) -LPS/MTA + NAC. Cell viability was measured using Alamar blue assay at 24 and 48 h. Production of mtROS was evaluated at 6 and 24 h by MitoSOX Red and MitoTracker Green. The expressions of IL-6, TNF-α, Bcl-2, Bax, Mfn-2 and Drp-1 genes were investigated at 6 h using reverse transcriptase-polymerase chain reaction (RT-PCR). For differentiation potential, cells were cultured in the osteogenic differentiation media and stained using Alizarin red assay at 14 and 21 days. The Kruskal-Wallis test, Mann-Whitney U test and one-way anova were performed for statistical analysis. RESULTS: NAC was associated with significantly greater LPS-induced hDPC viability (P < 0.05). Both Biodentine and MTA extracts promoted cell survival, whereas the combination of NAC to these material extracts significantly increased the number of viable cells at 24 h (P < 0.05). Biodentine, MTA or NAC did not alter the mtROS level (P > 0.05). NAC supplementation to the MTA extract significantly reduced the level of IL-6 and TNF-α expression (P < 0.05). Regarding mitochondrial dynamics, the use of NAC alone promoted significant Mfn-2/Drp-1 expression (P < 0.05). Most of the groups exhibited a level of Bcl-2/Bax gene expression similar to that of the control group. The increases in mineralization productions were observed in most of the groups, except the LPS group (P < 0.05). CONCLUSIONS: The antioxidant effect of NAC was not evident under the LPS-induced condition in DPC in vitro. NAC combined either with Biodentine or MTA improved LPS-induced hDPCs survival at 24 h. The combination of NAC with MTA promoted mineralization.

Development and evaluation of reparative tricalcium silicate-ZrO2 -Biosilicate composites.

Biosilicate is a bioactive glass-ceramic used in medical and dental applications. This study evaluated novel reparative materials composed of pure tricalcium silicate (TCS), 30% zirconium oxide (ZrO2 ) and 10 or 20% biosilicate, in comparison with Biodentine. Setting time was evaluated based on ISO 6876 standard, radiopacity by radiographic analysis, solubility by mass loss, and pH by using a pH meter. Cytotoxicity was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and NR assays. Alkaline phosphatase (ALP) activity and alizarin red were used to evaluate cell bioactivity. Antimicrobial activity was assessed on Enterococcus faecalis by the direct contact test. The data were submitted to analysis of variance (ANOVA)/Tukey; Bonferroni and Kruskal-Wallis, and Dunn tests (α = 0.05). The association of Biosilicate with TCS + ZrO2 had appropriate setting time, radiopacity, and solubility, alkaline pH, and antimicrobial activity. TCS and Biodentine showed higher ALP activity in 14 days than the control (serum-free medium). All cements produced mineralized nodules. In conclusion, Biosilicate + TCS ZrO2 decreased the setting time and increased the radiopacity in comparison to TCS. Biosilicate + TCS ZrO2 presented lower solubility and higher radiopacity than Biodentine. In addition, these experimental cements promoted antimicrobial activity and mineralization nodules formation, suggesting their potential for clinical use.

Investigation of a modified hydraulic calcium silicate-based material - Bio-C Pulpo

Abstract This study evaluated the physicochemical, biological, and antimicrobial properties of a new hydraulic calcium silicate-based modified material, and compared it with MTA Repair HP and MTA Angelus. The materials were assessed regarding color luminosity (L), color change, radiopacity, setting time, and ISO 6876:2012 linear flow. Volumetric filling and volume change were evaluated using microcomputed-tomography (µCT). Chemical characterization after 28 days in Hank's Balanced Salt Solution (HBSS) and pH analysis were also assessed. Biological characterization of cytotoxicity and microbiological assessment were also undertaken. Shapiro-Wilk, ANOVA, Levene and post hoc analyses with Bonferroni correction were performed, adopting a 5% significance level (p <0.05). Bio-C Pulpo exhibited the highest L values after 90 days. All tested materials demonstrated color change during the analyses, and had radiopacity above 5 mm Al. MTA Repair HP set faster than Bio-C Pulpo, whereas the latter had the highest linear flow. MTA Repair HP had the highest volumetric filling in µCT analysis. Bio-C Pulpo showed the highest alkalinity during all tested periods, and the highest volumetric loss (above 9%), in comparison with MTA Repair HP and MTA Angelus. Bio-C Pulpo did not form calcium hydroxide after hydration. MTA Repair HP demonstrated the highest cytocompatibility, and Bio-C Pulpo, the highest cytotoxicity. No inhibition halos were observed for any material, and similar higher turbidity values were seen after direct contact. Composition additives used in Bio-C Pulpo modified its properties, and both the absence of calcium hydroxide deposition after hydration, and the related cytotoxicity of this material are of particular concern.

In Situ 3D-to-2D Transformation of Manganese-Based Layered Silicates for Tumor-Specific T1-Weighted Magnetic Resonance Imaging with High Signal-to-Noise and Excretability.

Recently, Mn(II)-based T1-weighted magnetic resonance imaging (MRI) contrast agents (CAs) have been explored widely for cancer diagnosis. However, the "always-on" properties and poor excretability of the conventional Mn(II)-based CAs leads to high background signals and unsatisfactory clearance from the body. Here, we report an "in situ three-dimensional to two-dimensional (3D-to-2D) transformation" method to prepare novel excretable 2D manganese-based layered silicates (Mn-LSNs) with extremely high signal-to-noise for tumor-specific MR imaging for the first time. Our observations combined with density functional theory (DFT) calculations reveal that 3D metal (Mn, Fe, Co) oxide nanoparticles are initially formed from the molecular precursor solution and then in situ transform into 2D metal (Mn, Fe, Co)-based layered silicates triggered by the addition of tetraethyl orthosilicate, which provides a time-saving and versatile way to prepare novel 2D silicate nanomaterials. The unique ion-exchangeable capacity and high host layer charge density endow Mn-LSNs with an "ON/OFF" pH/GSH stimuli-activatable T1 relaxivity with superb high signal-to-noise (640-, 1200-fold for slightly acidic and reductive changes, respectively). Further in vivo MR imaging reveals that Mn-LSNs exhibit a continuously rapid T1-MRI signal enhancement in tumor tissue and no visible signal enhancement in normal tissue, indicating an excellent tumor-specific imaging. In addition, Mn-LSNs exhibit a rapid excretion from the mouse body in 24 h and invisible organ toxicity, which could help to solve the critical intractable degradation issue of conventional inorganic CAs. Moreover, the tumor microenvironment (pH/GSH/H2O2) specific degradability of Mn-LSNs could help to improve the penetration depth of particles into the tumor parenchyma. Developing this novel Mn-LSNs contrast agent, together with the already demonstrated capacity of layered silicates for drug and gene delivery, provides opportunities for future cancer theranostics.

MOF-Derived Double-Layer Hollow Nanoparticles with Oxygen Generation Ability for Multimodal Imaging-Guided Sonodynamic Therapy.

The high reactive oxygen species (ROS) generation ability and simple construction of sonosensitizer systems remain challenging in sonodynamic therapy against the hypoxic tumor. In this work, we rationally prepared MOF-derived double-layer hollow manganese silicate nanoparticle (DHMS) with highly effective ROS yield under ultrasound irradiation for multimodal imaging-guided sonodynamic therapy (SDT). The presence of Mn in DHMS increased ROS generation efficiency because it could be oxidized by holes to improve the electron-hole separation. Moreover, DHMS could produce oxygen in the tumor microenvironment, which helps overcome the hypoxia of the solid tumor and thus enhance the treatment efficiency. In vivo experiments demonstrated efficient tumor inhibition in DHMS-mediated SDT guided by ultrasound and magnetic resonance imaging. This work presents a MOF-derived nanoparticle with sonosensitive and oxygen generating ability, which provides a promising strategy for tumor hypoxia in SDT.

The influence of surface coatings on the toxicity of silver nanoparticle in rainbow trout.

Silver nanoparticles (nAg) are often produced with different coatings that could influence bioavailability and toxicity in aquatic organisms. The purpose of this study was to examine the influence of 4 surface coatings of nAg of the same core size towards bioavailability and toxicity in juvenile rainbow trout (Oncorhynchus mykiss). Juveniles were exposed to 50 µg/L of 50 nm diameter nAg for 96 h at 15 °C with the following coatings: branched polyethylenimine (bPEI), citrate, polyvinylpyrrolidone (PVP) and silicate (Si). The data revealed that the coatings influenced hepatic Ag loadings in the following trend PVP > citrate > bPEI and Si with estimated bioavailability factors of 28, 18, 6 and 2 L/kg respectively. Hepatic Ag levels were significantly associated with DNA damage and inflammation as determined by arachidonate cyclooxygenase activity. The bPEI and citrate-coated nAg consistently produced the observed effects above in addition to increased mitochondrial electron transport activity and glutathione S-transferase activity. The absence of metallothionein and lipid peroxidation suggests that mechanisms other than the liberation of Ag+ were at play. In conclusion, surface coatings were shown to significantly influence bioavailability and toxic properties of nAg to rainbow trout juveniles.

Alkaline earth silicate (AES) wools: Evaluation of potential cyto-genotoxic and inflammatory effects on human respiratory cells.

Biosoluble AES wools are increasingly used since considered not hazardous, however, few toxicity studies are available. We evaluated cytotoxic, genotoxic-oxidative and inflammatory effects of two differently soluble AES wools, AES1 (high MgO percentage) and AES2 (high CaO percentage), on alveolar (A549) and bronchial (BEAS-2B) cells. Fiber dimensions and dissolution in cell media were evaluated by SEM analysis. Cell viability, LDH release, direct/oxidative DNA damage (fpg-comet assay) and IL-6, IL-8 and TNF-α release (ELISA), were analysed after 24 h exposure to 2-200 µg/ml. On A549 cells AES1 induced LDH release, slight direct DNA damage and oxidative DNA damage with very high IL-6 release at 100 µg/ml; AES2 induced higher DNA damage than AES1 and slight oxidative DNA damage. On BEAS-2B cells we found direct DNA damage (higher for AES1) and slight oxidative DNA damage (associated to slight increased IL-6 and IL-8 release for AES1). The higher genotoxicity of more soluble AES2 on A549 cells could be explained by higher respirable fibers % and fiber number/µg found after 24 h in RPMI-medium at 100 µg/ml. The higher membrane damage, oxidative DNA damage and inflammation induced by AES1 in A549 cells could be due to the higher DLG and silica percentage. These findings suggest further investigations on AES toxicity.

Cytotoxicity, Cell Adhesion, and Apoptotic Gene Expression in Periodontal Ligament Fibroblasts treated with Endodontic Sealers.

OBJECTIVE: The present study assessed cytotoxicity, cell adhesion, and apoptotic gene expression in periodontal ligament fibroblasts (PLF) treated with 2 endodontic sealers. METHODS: PLF cells were obtained from nonerupted third molars and cultured. MTS and LIVE/DEAD assays were performed using different treatments and time periods. Cellular adhesion was evaluated using immunocytochemistry for integrin ß1 and vinculin expression, and the gene expressions of nuclear factor kB (NF-кB), P53, and apoptotic protease-activating factor 1 (Apaf-1) were evaluated using PCR. RESULTS: Cell proliferation at 12, 24, and 48 h was statistically significant in the control and PLF groups receiving different treatments; PLF treated with culture medium containing non-hardened (NH) sealers showed a decrease in the number of cells. PLF treated with culture medium containing hardened (H) sealers also exhibited a decreased cell population. Integrin ß1 and vinculin were expressed in both cell cultures treated with Acroseal (NH and H); however, the cell morphology changed and the cell population decreased. The gene expression of NF-kB and that of P53 were significantly different between the control group and the groups treated with the different sealers; mineral trioxide aggregate (MTA) (NH and H) inhibited Apaf-1, and PLF treated with Acroseal H exhibited increased Apaf-1 expression. CONCLUSION: Both sealers showed a certain level of cytotoxicity. The gene expression of NF-κB and P53 in PLF treated with the sealers showed significant changes compared to that of the control group, and MTA inhibited Apaf-1.

Assessing the bioactivity of crystalline silica in heated high-temperature insulation wools.

High-Temperature Insulation Wools (HTIW), such as alumino silicate wools (Refractory Ceramic Fibers) and Alkaline Earth Silicate wools, are used in high-temperature industries for thermal insulation. These materials have an amorphous glass-like structure. In some applications, exposure to high temperatures causes devitrification resulting in the formation of crystalline species including crystalline silica. The formation of this potentially carcinogenic material raises safety concerns regarding after-use handling and disposal. This study aims to determine whether cristobalite formed in HTIW is bioactive in vitro. Mouse macrophage (J774A.1) and human alveolar epithelial (A549) cell lines were exposed to pristine HTIW of different compositions, and corresponding heat-treated samples. Cell death, cytokine release, and reactive oxygen species (ROS) formation were assessed in both cell types. Cell responses to aluminum lactate-coated fibers were assessed to determine if responses were caused by crystalline silica. DQ12 α-quartz was used as positive control, and TiO2 as negative control. HTIW did not induce cell death or intracellular ROS, and their ability to induce pro-inflammatory mediator release was low. In contrast, DQ12 induced cytotoxicity, a strong pro-inflammatory response and ROS generation. The modest pro-inflammatory mediator responses of HTIW did not always coincide with the formation of cristobalite in heated fibers; therefore, we cannot confirm that devitrification of HTIW results in bioactive cristobalite in vitro. In conclusion, the biological responses to HTIW observed were not attributable to a single physicochemical characteristic; instead, a combination of physicochemical characteristics (cristobalite content, fiber chemistry, dimensions and material solubility) appear to contribute to induction of cellular responses.

A comparison of asbestos fiber potency and elongate mineral particle (EMP) potency for mesothelioma in humans.

We analyzed the mesothelioma mortality in cohorts of workers exposed to crocidolite, amosite, and chrysotile to estimate asbestos fiber potency for mesothelioma, using the method of Hodgson and Darnton (2000). We relied on the original 17 cohort studies in their analysis, along with 3 updates of those studies and 3 new asbestos cohort studies published since 2000. We extended the analyses to examine the mesothelioma potency of tremolite in vermiculite from Libby, Montana, and for non-asbestiform elongate mineral particles (EMPs) in taconite iron ore, talc, and South Dakota gold mining. Mesothelioma potency (RMeso) was calculated as the percent of all expected deaths that were due to mesothelioma per fiber/cc-year of exposure.The RMeso was 0.0012 for chrysotile, 0.099 for amosite, and 0.451 for crocidolite: thus, the relative potency of chrysotile:amosite:crocidolite was 1:83:376, which was not appreciably different from the estimates by Hodgson and Darnton in 2000. The RMeso for taconite mining fibers was 0.069 which was slightly smaller than that for amosite. The RMeso for Libby fibers was 0.028 which was greater than that for chrysotile and less than that for amosite. Talc and gold mining EMPs were non-potent for mesothelioma. Although there are a number of methods for estimating fiber potency of asbestos and non-asbestiform EMPs, the method of Hodgson and Darnton provides a uniform method by which fiber potency can be compared across many fiber types. Our estimates of RMeso provide a useful addition to our knowledge of mesothelioma potency for different asbestos and non-asbestiform EMP fibers.

Characterization of pulmonary responses in mice to asbestos/asbestiform fibers using gene expression profiles.

Humans exposed to asbestos and/or asbestiform fibers are at high risk of developing many lung diseases including asbestosis, lung cancer, and malignant mesothelioma. However, the disease-causing potential and specific metabolic mechanisms and pathways associated with various asbestos/asbestiform fiber exposures triggering different carcinogenic and non-carcinogenic outcomes are still largely unknown. The aim of this this study was to investigate gene expression profiles and inflammatory responses to different asbestos/asbestiform fibers at the acute/sub-acute phase that may be related to delayed pathological outcomes observed at later time points. Mice were exposed to asbestos (crocidolite, tremolite asbestos), asbestiform fibers (erionite), and a low pathogenicity mineral fiber (wollastonite) using oropharyngeal aspiration. Similarities in inflammatory and tissue damage responses, albeit with quantitative differences, were observed at day 1 and 7 post treatment. Exposure to different fibers induced significant changes in regulation and release of a number of inflammatory cytokines/chemokines. Comparative analysis of changes in gene regulation in the lung on day 7 post exposure were interpretable in the context of differential biological responses that were consistent with histopathological findings at days 7 and 56 post treatment. Our results noted differences in the magnitudes of pulmonary responses and gene regulation consistent with pathological alterations induced by exposures to four asbestos/asbestiform fibers examined. Further comparative mechanistic studies linking early responses with the long-term endpoints may be instrumental to understanding triggering mechanisms underlying pulmonary carcinogenesis, that is lung cancer versus mesothelioma.

Occupational exposure to Mount Etna's basaltic dust: Assessment of mutagenic and cytotoxic effects.

Basalt and volcanic ash are natural constituents of the ground surrounding volcanic areas such as Mount Etna. The dust may be daily inhaled by the general population as well as by several types of workers, such as construction workers. In this experiment, we analyzed the potential mutagenic and cytotoxic effects of the materials used in construction industry, excavated from Mt. Etna. Ground basalt (A), volcanic ash (B), mixed basalt and cement (C) and cement (D) were studied with Ames test, for mutagenic assessment and with MMT assay for cytotoxic evaluation. The Ames test revealed that cement (sample D), showed a higher and significant mutagenicity than the samples A, B and C. MTT assay showed that samples C and D had a slightly more negative impact on cell viability than A and B. In conclusion, no particular risks seem to exist for construction industry workers, while the exploitation of cement and cement mixed with basalt seems to be a risk for workers, given the high percentage of silica and iron.

Cytotoxicity of New Calcium Aluminate Cement (EndoBinder) Containing Different Radiopacifiers

Abstract This study aimed to evaluate the cytotoxicity of a calcium aluminate cement (EndoBinder) containing different radiopacifiers, Bi2O3, ZnO or ZrO2, compared with Mineral Trioxide Aggregate (MTA). According to ISO 10993-12:2012 (E) recommendations, 0.2 g of each cement were applied in transwell inserts and placed in 24-well culture plates containing 1 mL of culture medium (DMEM). After 24 h of incubation, the extracts (DMEM containing components released from the cements) were applied to immortalized odontoblast-like MDPC-23 cells. Cell viability (MTT test), alkaline phosphatase activity (ALP), total protein production and cell morphology (Scanning Electron Microscopy - SEM) were evaluated. The volume of 50 µL of extract was used to determine the chemical elements released by the cements using Energy Dispersive Spectroscopy (EDS). The following groups were established (n=6): NC - negative control (without treatment); EB - EndoBinder without radiopacifier; EBBO - EndoBinder+Bi2O3; EBZnO - EndoBinder+ZnO; EBZrO - EndoBinder+ZrO2 and WMTA - White MTA. Data were subjected to statistical analysis (Kruskal-Wallis test, level of significance=5%). Cells exposed to the different versions of EndoBinder presented small reduction in viability, total protein production and ALP activity, with values similar to the NC and WMTA groups (p>0.05). Different elements (C, O, Na, Al, P, Si, Cl, Bi, K) released by the cements were detected in the extracts. However, the cells had no significant changes in their morphology. EndoBinder and MTA did not affect negatively the metabolism of the odontoblastic-like cells, showing it to be cytocompatible, irrespective of the used radiopacifier.

Resumo Este estudo avaliou a citotoxicidade de um cimento de aluminato de cálcio (EndoBinder) contendo diferentes radiopacificadores, Bi2O3, ZnO ou ZrO2, comparativamente ao trióxido mineral agregado (MTA). Seguindo a norma ISO 10993-12:2012 (E), 0,2 g de cada cimento foi aplicada em insertos transwell, que foram colocados em placas de cultura de 24 wells contendo 1 mL de meio de cultura (DMEM). Após 24 h de incubação, os extratos (DMEM contendo componentes liberados dos cimentos) foram aplicados sobre células pulpares imortalizadas MDPC-23. Viabilidade celular (teste de MTT), atividade da fosfatase alcalina (ALP), produção de proteína total e a morfologia das células (Microscópio Eletrônico de Varredura - MEV) foram avaliadas. Um volume de 50 µL do extrato foi utilizado para determinar, através de Espectroscopia de Energia Dispersiva (EDS), os elementos químicos liberados pelos cimentos. Os seguintes grupos foram estabelecidos (n=6): NC - controle negativo (sem tratamento); EB - EndoBinder sem radiopacificador; EBBO - EndoBinder+Bi2O3; EBZnO - EndoBinder+ZnO; EBZrO - EndoBinder+ZrO2 e WMTA - MTA branco. Os dados foram submetidos à análise estatística (teste de Kruskal-Wallis, nível de significância=5%). Células expostas às diferentes versões de EndoBinder apresentaram pequena redução na viabilidade, produção de proteína total e atividade da ALP, com valores semelhantes aos grupos NC e WMTA (p>0,05). Diversos elementos (C, O, Na, Al, P, Si, Cl, Bi, K) liberados pelos cimentos foram detectados nos extratos. Entretanto, as células não apresentaram alterações significativas em sua morfologia. EndoBinder e MTA, não afetaram negativamente o metabolismo das células odontoblastóides, mostrando-se citocompatíveis, independente do radiopacificador utilizado.

Physical-chemical properties and cytotoxicity analysis of 5 different endodontic sealers / Propriedades físico-químicas e análise da citotoxicidade de 5 diferentes cimentos endodônticos

The aim of this study was to analyze the radiopacity, setting time, flowability, pH, calcium ion release, solubility and cytotoxicity of bioceramic cements Totalfill BC Sealer and Totalfill BC RRM, and compare them with AH Plus, MTA Fillapex and MTA Angelus. The groups were divided and compared among them according to the filling and retro-filling cement functions. Totalfill BC Sealer was compared with AH Plus and MTA Fillapex; and Totalfill BC RRM retrofilling cement with MTA Angelus. For radiopacity analysis, specimens were placed in metal rings measuring 10x1 mm placed on occlusal film together with the aluminum scale. Digora 1.51 software was used to evaluate the digitized images and determine radiographic density. Setting time was tested in accordance with the American Society for Testing and Materials C266-08 standard specifications, but specimens were fabricated in accordance with the International Organization for Standardization 6876: 2001. Flow was tested in accordance with ANSI/ADA No.57/200 specifications. In total 30 acrylic teeth were filled with filling-cements and 20, with (retrograde cavity) retro-filling cements. All teeth were immersed in ultrapure water for pH and calcium ion release measurement (atomic absorption spectrophotometer) for time intervals of 1, 3, 24, 72, 168 and 360 hours. Solubility was tested by scanning and digitizing 50 acrylic teeth twice by Micro- CT, before and after immersion in ultrapure water for time intervals of 168, 360 and 720 hours. The images were reconstructed and volume (mm3) values of samples obtained by means of CTan software (CTan v1.11.10.0, SkyScan). The in vitro effects on cells were analyzed at concentrations of 100, 50, 10, 5, 1 mg/mL, and 0 mg / mLnegative control group and recorded in time intervals of 24, 48 and 72 hours by MTT reduction assay. The results were statistically analyzed by the ANOVA, Tukey, Kruskal-Wallis and Dunn tests (P<0.05). All radiopacity values according to ISO 6876/2001, AH Plus (7.86 mm Al) being the most radiopaque followed by Totalfill BC Sealer (4.84 mm Al), MTA Fillapex (3.41 mm Al), Totalfill BC RRM (6.8 mm Al), and MTA Angelus (6.7 mm Al). The following values were the initial and final setting time (in hours), respectively: AH Plus (8 and 15); Totalfill BC Sealer (11 and 24); MTA Fillapex (13 and 26); MTA Angelus (10 and 120 minutes) and Totalfill BC RRM (3 hours and 22 hours). In flow analysis, the cements behaved as follows: MTA Fillapex (47 mm), Totalfill BC Sealer (41.5 mm), Totalfill BC RRM (33.5 mm), AH Plus (33 mm) e MTA Angelus (17.5 mm) (p < 0.05). pH analysis showed in general the lowest values for AH Plus cement, followed by Totalfill BC RRM, MTA Angelus, MTA Fillapex and Totalfill BC Sealer. AH Plus showed the highest Ca2+ release in time interval 1 hour (1.38 mg/L); MTA Fillapex, in 360 hours (3.81 mg/L); MTA Angelus, 1 hour (1.38 mg/L); Totalfill BC Sealer, 360 hours (6.77 mg/L) and Totalfill BC RRM, 360 hours (3.81 mg/L). Almost all the sealers presented solubility lower than 3% in all periods, as recommended by ISO 6876/2001. Whereas, the MTA Fillapex solubility value was higher than 5% in all periods. Relative to cytotoxicity, all the cements were shown to be toxic at the concentration of 100 mg/mL, however, Totalfill BC Sealer and Totalfill BC RRM showed the best cell viability result compared with the other cements tested. We concluded that all root canal filling and root retro-filling complied with the requisites of radiopacity, setting time, flow, pH, calcium ion release, solubility and cytotoxicity. With the exception of the MTA Fillapex that not only fulfilled the requirement of solubility. Of the sealers, Totalfill BC Sealer was outstanding: it showed the highest pH and Ca2+ release, and lowest cytotoxicity. Among the retrofilling cements, Totalfill BC RRM maintained its high pH, higher Ca2+ release, and lower cytotoxicity. (AU)

O objetivo do presente estudo foi analisar a radiopacidade, tempo de presa, escoamento, pH, liberação de íons cálcio, solubilidade e citotoxicidade dos cimentos biocerâmicos Totalfill BC Sealer e Totalfill BC RRM e compará-los ao AH Plus, MTA Fillapex e MTA Angelus. Os grupos foram divididos e comparados entre si de acordo com as funções dos cimentos de obturação e retro-obturação. Comparamos o cimento obturador Totalfill BC Sealer com os cimentos AH Plus e MTA Filapex, e o cimento retrobturador Totalfill BC RRM com o cimento retrobturador MTA Angelus. Para análise da radiopacidade, os espécimes foram colocados em anéis metálicos medindo 10x1 mm, dispostos sobre um filme oclusal com uma escala de alumínio. O software Digora 1.51 foi utilizado para avaliar as imagens digitalizadas e determinar a densidade radiográfica. O tempo de presa foi realizado de acordo com as especificações da American Society for Testing and Materials C266-08 standard specifications, mas os espécimes foram feitos de acordo com a International Organization for Standardization 6876: 2001. O escoamento foi realizado de acordo com as especificações ANSI/ADA N0 57/2000. Trinta dentes acrílicos foram preenchidos com cimentos obturadores e vinte dentes de acrílico (com cavidade retrógrada) foram preenchidos com cimentos retro-obturadores e imersos em água ultrapura para mensuração do pH e liberação de íons cálcio (espectrofotômetro de absorção atômica) no período de 1, 3, 24, 72, 168 e 360 horas. Para o teste de solubilidade, foram escaneados 50 dentes acrílicos e digitalizados duas vezes pelo Micro-CT, antes e após a imersão em água ultrapura nos períodos de 168, 360 e 720 horas. As imagens foram reconstruídas e o volume (mm3) das amostras foi obtido usando o software CTan (CTan v1.11.10.0, SkyScan). Os efeitos celulares in vitro foram analisados nas concentrações de 100, 50, 10, 5, 1 mg/mL e 0 mg / mLgrupo controle negativo e registados nos períodos de 24, 48 e 72 horas através do ensaio de redução de MTT. Os resultados foram analisados estatisticamente pelos testes ANOVA, Tukey, Kruskal-Wallis e Dunn (p < 0.05). Todos os valores de radiopacidade estavam de acordo com a norma ISO 6876/2001, sendo o AH Plus (7.86 mm Al) o mais radiopaco seguido dos demais cimentos; Totalfill BC Sealer (4.84 mm Al), MTA Filapex (3.41 mm Al), Totalfill BC RRM (6,8 mm Al), MTA Angelus (6,7 mm Al). Os valores obtidos para o tempo de presa inicial e final foram respectivamente, AH Plus (8 e 15 horas), Totalfill BC Sealer (11 e 24 horas), MTA Filapex (13 e 26 horas), Totalfill BC RRM (3 horas e 22 horas) e MTA Angelus (10 e 120 minutos). Na análise de escoamento os cimentos se comportaram da seguinte forma: AH Plus (33 mm), MTA Filapex (47 mm), Totalfill BC Sealer (41,5 mm), Totalfill BC RRM (33,5 mm), e MTA Angelus (17,5 mm) (p < 0.05). A análise do pH mostrou que o cimento AH Plus de um modo geral, foi o que apresentou os menores valores, seguido do Totalfill BC RRM, MTA Angelus, MTA Filapex e Totalfill BC Sealer. A maior liberação de Ca2+ do AH Plus foi no período de 1 hora (1.38 mg/L), MTA Filapex foi em 360 horas (3.81 mg/L), Totalfill BC Sealer 360 horas (6.77 mg/L), Totalfill BC RRM 360 horas (3.81 mg/L) e MTA Angelus em 1 hora (1.38 mg/L). Todos os cimentos apresentaram solubilidade menor que 3% em todos os períodos, como recomendado pela ISO 6876/2001. Entretanto, os valores de solubilidade do MTA Fillapex excedeu mais que 5% em todos os períodos. Com relação à citotoxicidade, todos os cimentos mostraram-se tóxicos na concentração de 100 mg/mL, porém o Totalfill BC Sealer e Totalfill BC RRM apresentaram melhor resultado de viabilidade celular comparado aos demais cimentos testados. Concluiu-se que os cimentos de obturação e retro-obturação cumpriram os requisitos de radiopacidade, tempo de presa, escomento, pH, liberação de íons cálcio, solubilidade e citotoxicidade. Com exceção do MTA Fillapex que não cumpriu somente o requisito de solubilidade. Dos cimentos obturadores, o que melhor se portou foi o Totalfill BC Sealer, apresentando maior pH e liberação de íons cálcio e menor citotoxicidade. Dentre os cimentos retro-obturadores, Totalfill BC RRM foi o que melhor se destacou, mantendo seu pH elevado, possuindo maior liberação de Ca2+ e menor citotoxicidade. (AU)

Calcium-silicate mesoporous nanoparticles loaded with chlorhexidine for both anti- Enterococcus faecalis and mineralization properties.

BACKGROUND: In infected periapical tissues, Enterococcus faecalis is one of the most common dominant bacteria. Chlorhexidine has been proved to show strong antibacterial ability against E. faecalis but is ineffective in promoting mineralization for tissues around root apex. Mesoporous calcium-silicate nanoparticles are newly synthesized biomaterials with excellent ability to promote mineralization and carry-release bioactive molecules in a controlled manner. In this study, mesoporous calcium-silicate nanoparticles were functionalized with chlorhexidine and their releasing profile, antibacterial ability, effect on cell proliferation and in vitro mineralization property were evaluated. RESULTS: The chlorhexidine was successfully incorporated into mesoporous calcium-silicate nanoparticles by a mixing-coupling method. The new material could release chlorhexidine as well as Ca2+ and SiO32- in a sustained manner with an alkaline pH value under different conditions. The antimicrobial ability against planktonic E. faecalis was dramatically improved after chlorhexidine incorporation. The nanoparticles with chlorhexidine showed no negative effect on cell proliferation with low concentrations. On dentin slices, the new synthesized material demonstrated a similar inhibitory effect on E. faecalis as the chlorhexidine. After being immersed in SBF for 9 days, numerous apatite crystals could be observed on surfaces of the material tablets. CONCLUSIONS: Mesoporous calcium-silicate nanoparticles loaded with chlorhexidine exhibited release of ions and chlorhexidine, low cytotoxicity, excellent antibacterial ability and in vitro mineralization. This material could be developed into a new effective intra-canal medication in dentistry or a new bone defect filling material for infected bone defects.

Interaction of dental pulp stem cells with Biodentine and MTA after exposure to different environments

ABSTRACT Objective: The aim of the present study was to evaluate and compare the cytotoxic effects of Biodentine and MTA on dental pulp stem cells (DPSCs) and to assess cell viability and adherence after material exposure to an acidic environment. Material and Methods: DPSCs were cultured either alone or in contact with either: Biodentine; MTA set for 1 hour; or MTA set for 24 hours. After 4 and 7 days, cell viability was measured using the MTT assay. Biodentine and MTA were also prepared and packed into standardized bovine dentin disks and divided into three groups according to the storage media (n=6/group): freshly mixed materials without storage medium (Group A); materials stored in saline (Group B); materials stored in citric acid buffered at pH 5.4 (Group C). After 24 hours, DPSCs were introduced in the wells and cell adherence, viability, and cellular morphology were observed via confocal microscopy after three days of culture. Cell viability was analyzed using repeated-measures analysis of variance test with Tukey's post hoc tests (α=0.05). Results: Biodentine expressed significantly higher cell viability compared with all other groups after 4 days, with no differences after 7 days. Notably, cell viability was significantly greater in 24-hour set MTA compared with 1-hour set MTA and control groups after 7 days. Material exposure to an acidic environment showed an increase in cell adherence and viability in both groups. Conclusions: Biodentine induced a significantly accelerated cell proliferation compared with MTA. Setting of these materials in the presence of citric acid enhanced DPSC viability and adherence.